by Mislav Babić | May 11, 2023 | Case Study
In this report, we will show the case preparation for a CHT simulation. Geometry preparation The model of the battery pack was given as a 2D drawing in a DXF file format – a vector format mostly used by engineers and architects for 2D drawings during product...
by Mislav Babić | Mar 27, 2023 | Case Study
This case study demonstrates how to mesh and set up a multi-domain case with a rotating mesh. The analyzed geometry represents a Darrieus-Savonius wind turbine. Geometry preparation For more detailed tips and tricks on how to prepare your geometry and provide...
by Karlo Jurina | Oct 24, 2022 | Case Study
This case study shows the methodology for the generation of multi-material meshes in heat exchangers. In most cases, the device is designed by many engineers, resulting in imperfect CAD data with overlaps and self-intersections. CF-MESH+ does not require perfect CAD...
by admin | Jan 23, 2018 | Case Study
This study demonstrates automatic mesh generation on a simplified 3D model of The White House using CF-MESH+. The study shows the features enabling quick generation of the computational domain and refinement regions, needed to generate a quality mesh. The quality of...
by Alen Cukrov | Jul 14, 2016 | Case Study
Summary This study presents the meshing process using CF-MESH+ developed to gain the following:• A high-quality boundary layer mesh, needed for accurate heat transfer simulations• 100% layer coverage even for complex geometries• A mesh with conformal interfaces...
by Alen Cukrov | Jan 10, 2016 | Case Study
1 Introduction The present report deals with user-friendly automatic hex-dominant mesh generation on a Formula One model of industrial importance. The mesh generation is carried out using CF-MESH+ software. Also, many CF-MESH+ features and settings were shown and...
